GTH HI DECK

· The original design power tilting deck over trailer! Just punch a button to tilt it up and another to tilt it down. 

· Torque tubes keep torsional twist to a minimum. 

· Full 19 pound per foot wide flange 12” I beam frame, neck and tongue std.

· 3” channel crossmembers on 16 inch centers always. 

· Low profile 36” deck height std. 

· Full 102” wide deck std. 

· Adjustable height 2 5/16” gooseneck coupler with dual slide locks plus through neck locate pin for secure towing. 

· 3/8” grade 70 safety chains with self latching hooks.

· Extra long 7 prong plug on cable for easy tow plug attached below rear bumper or up in bed. 

· Hand assembled wiring harness is run through flexible seamless pvc conduit for non conductivity and weather resistance. 

· Full led front, side and rear clearance maker light system plus redundant led tail lights and led rear center marker light all std. 

· 5” or larger channel steel rub rail for a stiff, hard to damage rub rail for years to come. 

· Alternating spindle and stake pockets with heavier 4 gauge steel stake pockets inside rub rails down both sides of bed from front to rear.

· Dual 12K Spring loaded jacks std. 

· Mesh bottom chain tray in bottom of neck uprights std. 

· Complete self contained hoist hydraulic system, just like in our dump box trailers for easy tilt up loading and unloading at the push of a button. 

· On board 3,000psi two way hydraulic system makes loading and unloading a breeze indeed! 

· Battery system is wired to charge from your truck while towing to keep the battery topped off and in running condition. 

· Winch plate in floor standard on all GTH models.

· 10 year warranty on everything we weld, including the ramps. 

· 10 year warranty on our #1 grade treated wood flooring. 

· Std models come with tandem 7,000lb American made easy lube brake axles, with many upgrade choices available! 

· All gooseneck models come with a spare mount pre installed on top of the neck.

· Compete choice of our channel steel rub rail or the old style flat strap outer rub rail, same price. 

· 14,000lb GVWR std, 16,000lb, 20,000lb and even 24,000lb options available. 

· We invite you to look and compare with any other brand on the market. Each of our units is hand built by a small team of specialists in our plant and everyone is built to order.

· We don’t have off-the-shelf models! You get what you want the way you want it. 

· Check out pricing on the following page and don’t be afraid to call with questions! 712 589 3100

GTH Hi Deck Tilt Trailers Models and pricing…. 14k std suspension. 

24’ GTH tilt  $14,795

26’ GTH tilt $14,995

28’ GTH tilt $15,195

30’ GTH tilt $15,395

32’ GTH tilt $15,595

34’ GTH tilt $15,795

36’ GTH tilt $15,995

38’ GTH tilt $16,195

40’ GTH tilt $16,395

42’ GTH tilt $16,595

44’ GTH tilt $16,795

Options

· Tag hitch instead of gooseneck hitch? Same price. 

· Inverted flat strap rub rails. N/C

· Knife edge on tail- $400

· Container prep package…. All steel floor, knife edge tail, lifted side rails as guides, no stake pockets, under bed sliding ratchets, container stops and more- $120 a foot

· Extra D ring tie downs $15 each. 

· Upgrade std 10 ply E rated 16” tires to 14 ply G rated- $70 per tire. 

· Combo Tilt $2500

· 16K suspension upgrade.With upgrade G series 16” radials on heavy wheels- $1,295

· 16K upgrade with ST215/75R-17.5 disc wheels- $1,695

· 20K GVWR upgrade tandem dual 10k Dexter axles electric brakes- $3,495

· 20K GVWR upgrade with ST215/75R-17.5” super single wheels and tires- $3,495

· 21K GVWR Triple 7’s axle upgrade- $1,995

· 24K GVWR upgrade tandem 12,000lb Dexter dually axles with electric brakes- $4,995

· 24K GVWR (2-12K axles) upgrade with super single- $4,995

· 24K GVWR w/ Triple’s G-rated 16” - $3,695

· 24K GVWR w/ Triple’s H-rated 17.5 - $4,395

· Electric 4 wheel brakes std. 

· Electric over hydraulic drum brake system- $2,295

· Electric over hydraulic disc brake system- $2,795

· Single hydraulic jack- $895

· Dual hydraulic landing gear- $1,790

· Add lid to std chain tray at base of neck- $175

· Fill upper tray in gooseneck with steel mesh for open storage- $500

· Deck on neck, wood floor with rub rails and tapered front corners for cab clearance- $1,000

· Extra LED marker lights- $25 each

· Sliding rail under edge for 4” truck ratchets- $55 per foot

· 4” sliding ratchets for above track, no straps- $25 each

· Bridged frame under main frame for extra support- $40 per foot. 

· Steel main floor over lengthwise stringers for extreme strength- $100 per foot

· Under bed lockable storage boxes 

· 3’- $300

· 4’- $400

· 5’- $500

· Mid ship turn signals- $150

· Colors! Black std. 

· Vivid red- $200

· Bright yellow- $200

· Brilliant Blue- $200

· Charcoal Grey- $200

· JD Green- $200

· Commercial Orange- $200

· 12K electric winch mounted- $895

· ST235/80R-16 E rated radial spare wheel and tire (matches std 14K suspension model)- $190

· ST235/85R-16 G rated wheel and tire- $280

· Dually wheel with 16” 10 ply radial- $225

· Dually wheel with 16” 14 ply tire- $280

· ST215/75R-17.5 disc wheel and tire- $350

· ST235/75R-17.5 super single wheel and tire- $400