HD Flatbed Channel Steel Flatbeds
Our original design developed over 32 years ago. Proven, tested and reliable hauler for decades to come.
· Always 84” between fenders.
· Low 9” fender height for easy car door clearance on standard base models.
· Full 5” Schedule A36 channel steel frame, tongue and full tongue wraps for an incredibly rugged design on standard base models.
· 3” channel steel crossmembers on 24” centers
· Super strong 14,000lb rated 2 5/16” coupler with padlock port for easy security.
· Dual heavy duty, extra long, bright plated safety chains with self latching hooks.
· 7 prong RV style lighting plug flows into a shielded and conduit enclosed lighting system for trouble free lighting.
· 8,000lb dropleg tongue storage jack is set back in the tongue nearly 2 feet to eliminate any clearance issues with your truck’s tailgate.
· Jack has super large sand pad foot, pull pin drop leg and a total of 30” of available travel for easy hooking and unhooking.
· 9” high bed front headache rack on standard base models keeps things on the bed, even under extreme braking.
· Multiple stake pocket tie downs along both sides (the longer the trailer, the more pockets you get!) for easy tie down of cars or equipment to a solid point. Also perfect for building side boards on if need.
· Steel fenders come braced on both ends, as well as inside for impressive strength. Our fenders are strong enough to sit or walk on without worry.
· Extra thick fender front rock guard to keep rock chips at a minimum on both fender fronts.
· Tandem 3,500lb DEXTER brand axles.
· Easy lube hubs
· Stronger 6 bolt pattern hubs std.
· 4 wheel electric brakes std.
· Rugged perma lube bushed tandem leaf spring suspension. Smooth riding, sturdy and easily serviced.
· On board brake safety breakaway system with battery and charger included and already wired.
· New ST205/75R-15 6 ply radial trailer tires on extra strong 6” wide Dexter brand wheels come with a direct to the manufacturer 2 year warranty!
· 100% LED lighting system with Thinline LED tail and rear clearance marker lights for a super clean look and hard to damage location.
· Front corner, front fender, rear fender and rear corner LED marker lights std.
· All HD flatbed trailers come std with dual 5’ long pull out ramps in their own under floor, lockable carrier.
· Full width rear ramp hook allows you to place your ramps anywhere across the tail of the trailer for easier loading of small cars and equipment.
· Every trailer is hand built, then hand prepped before being acid washed, phosphate coated and then treated to our exclusive PMI CarboncoatDM Polyester Hybrid finish in three final coats.
· Frankly, feature for feature, pound for pound, dollar for dollar, this trailer cannot be beaten by any other company. Go shop and compare!
Available Models.
Most popular highlighted in red
All HD flatbeds come std in 84” wide floor width. Units priced by length in feet.
10’ $4,670
12’ $4,725
14’ $4,815
16’ $4,865
18’ $5,110
20’ $5,365
22’ $5,605
24’ $5,990
26’ $6,355
28’* $6,595
30’** $6,845
32’** $7,365
34’** $8,115
36’** $8,715
38’* $9,985 - 38’- 44’
40’* $10,445 GN ONLY
42’* $10,975 add $675
44’* $11,465
*= must upgrade to a MINIMUM of 9,990lb suspension
**Gooseneck hitch strongly recommended on all units 30’ or longer.
Tons of great options….
All of our customers favorite options are listed in bold red color for easy reference!
2’ dovetail- $300
4’ dovetail- $550
Bobcat ramps - $350
Spring assist on
Bobcat ramps- $200
Low Profile Monster Ramps- $1295
Bulldog coupler 2 5/16”- $85
Adjustable height coupler with pintle ring, regular or bulldog coupler- $95
12K jack- $175
Dual 12k jacks - $350
Steel locking storage box in tongue- $200
Diamond plate steel floor- $80 per foot of length.
Open pit steel floor- $80 per foot of length.
Fender Width Floor- $60 foot
Removable fenders- $200
Drive over fenders- $300
Rub rails- $10 per foot of length.
D rings- $15 each
Car Guard Bed front fairing- $625
Upgrade from standard C rated ST205 radials to D rated 225 radials, all four wheels- $135
Aluminum wheel upgrade for a set of four- $400
Spare ST205 radial wheel and tire loose- $140
Spare ST225/75R-15 wheels and tire- $160
Spare tire mount- $50
Recessed D rings (steel floor only)- $25
12” tall sides- $40/ft
Winch tube lateral- $125
Winch tube vertical- $125
2,500lb mechanical winch in removable mount and vertical winch tube- $300
Winch plate welded onto front of trailer deck for easy mount of electric winch- $125
Winch plate in floor- $175
Call for installed prices on electric winches with or without on board battery packs.
Gooseneck hitch upgrade- $675
Converts our bumper pull chassis into a full gooseneck design and even includes a 12,000lb spring retracting foot jack in the pack!
9,990lb GVWR package-$995
Includes bigger frame, 16” spaced crossmembers, tandem 5,200lb brake axles and upgraded 225 d rated radial 15” tires plus upgrade from 2” channel ramps to stronger 3” channel ramps.
Spare ST225/75R-15 D rated wheel and tire- $160
Spare mount- $50
14,000lb GVWR pack- $1,200
Includes adjustable height coupler, Upgraded frame, tongue, 16” spaced crossmembers, tandem 7,000lb brake axles, 8 bolt 16” wheels with ST235/80R-16 E rated radials and upgraded 3” pullout ramps
Upgrade 14,000lb pack to G rated ST235/85R-16 tires $280 for 4
E rated 16” spare radial wheel and tire loose- $190
G rated 16” spare radial wheel and tire loose- $280
Spare mount- $50
16,000lb GVWR pack $1895
Frame size upgrade, 16” span crossmembers, upgraded tongue channel, adjustable height coupler with properly rated 2 5/16” ball hitch or pintle ring, upgrade to 12,000lb spring loaded retracting gooseneck style jack set back in tongue,with upgraded spring and mount system, heavier 16” 8 bolt wheels with G rated ST235/85R-16 radial tires and upgraded pull out ramps.
Spare G rated ST235/85R-16 wheel and tire loose- $280
Spare mount- $50
16,000lb pack with 16 ply H rated ST215/75R-17.5 wheels and tires as an upgrade- $2,195
Spare ST215/75R-17.5 wheel and tire- $350
Spare mount- $50
21,000lb 3 axle GVWR- $2,995
16” crossmember spans, Adjustable height coupler, 12k dropleg jack, 7 gauge steel drive over fenders, upgraded pull out ramps and 3 7,000lb axles with double equalizer suspension with 6 heavy duty 16” bolt wheels running ST235/80R-16 E rated radial tires. It’s a massively strong upgrade indeed.
Colors…
Black color std.
Red, Charcoal, Orange, Yellow, Blue or JD Green- $200